1. What is the time cost of LEISUWASH 360/370/380 full fine washing?
–The LEISUWASH 360/370/380 takes 28 seconds to complete a lap and a fine wash with high-pressure water spray, wax, foam and air drying, which takes about 6 minutes in total.

What is the time cost of LEISUWASH S90/X-Smart full fine washing?
–A full-body rinse takes approximately 50 seconds, while a basic express wash completes in 2 minutes. For a comprehensive clean with detailing treatments, the premium wash requires 5 minutes.

What is the time cost of LEISUWASH DG full fine washing?
–A basic express wash completes in 2 minutes. For a comprehensive clean with detailing treatments, the premium wash requires 6 minutes.
What is the time cost of LEISUWASH SG pro/plus full fine washing?
–A basic express wash completes in 2 minutes. basic express wash completes in 2 minutes. For a comprehensive clean with detailing treatments, the premium wash requires 6 minutes.

2. How effective is the drying performance of your car wash machine?
The extended-range high-pressure air drying system utilizes aerodynamic principles to achieve a 90% water removal rate, demonstrating significantly enhanced safety and operational stability compared to traditional contoured air drying systems found in brush wash machines.

3. What are the spatial requirements for installing this car wash machine?
For 360:7500mm × 3900/4200mm × 3200mm (L×W×H) are the dimensions of the entire installation frame, with the width varying depending on the model. Typically, you need to reserve 100-200mm of space on all sides based on these measurements.

For S90:6305/6805mm × 3500/4300mm × 3200mm (L×W×H) are the dimensions of the entire installation frame, with the length/ width varying depending on the model. Typically, you need to reserve 100-200mm of space on all sides based on these measurements.

For DG:8500/9000mm × 4200mm × 3200mm (L×W×H) are the dimensions of the entire installation frame, with the length varying depending on the model. Typically, you need to reserve 100-200mm of space on all sides based on these measurements.

For SGpro 8900mm × 4000mm × 3400mm (L×W×H) are the dimensions of the entire installation frame.Typically, you need to reserve 100-200mm of space on all sides based on these measurements.

4.What is the maximum vehicle size (L×W×H) that the system can accommodate?
The maximum vehicle dimensions (L×W×H) of LEISUWASH 360 that can be washed are 5900 × 2980 × 2050 mm.

The maximum vehicle dimensions (L×W×H) of LEISUWASH S90 that can be washed are 5400 × 2600 × 2050 mm.

The maximum vehicle dimensions (L×W×H) of LEISUWASH DG that can be washed are 5600 × 2100 × 2100 mm.

The maximum vehicle dimensions (L×W×H) of LEISUWASH SG pro that can be washed are 5600 × 2950 × 2250 mm.

5.What power supply is required to run Leisuwash?
The Leisuwash car wash system requires a three-phase industrial power input (standard: 380V/50Hz in China). For non-standard voltage or frequency requirements, we offer customized Siemens motors and compatible upgrades to the fan system, low-voltage wiring, and control modules to ensure full compatibility.

6.How to do the installation and after-sales service for Leisuwash?
* We dispatch technicians (150 USD/day salary + travel expenses*).
* Travel costs: Flights, visas, accommodation.
Self-Installation
DIY setup with our detailed manual; remote guidance available upon request.

7. What do I need to prepare before machine installation?
* 3 phase industrial power supply, 25Kw.
* Water supply with water tank. (2000 liters)
* Air compressor, air volume over 0.67m & sup3; /min, it can provide stable air pressure of more than 0.8Mpa.
* The thickness of the floor cement needs to be greater than 20 cm, if it is not enough, six concrete columns need to be made for the installation of the support frame, and the floor level error is less than 3 cm.
* 2 pieces of scaffolding.
* 1 piece of electric hammer, equipped with 10, 14, 16 drills per piece.
* 1 electric welding machine.
* 1 polishing machine.
* Infrared class 1 computer.
* Rough twine 10 meters.
* Manual electric drill 1 pc.

8. What is the warranty of Leisuwash?
<Warranty Coverage>

• * Water pump/motor: 3-year warranty.
  * Wearing parts (e.g., seals, belts): 1-year warranty.
  * Free replacement parts for manufacturing defects or failures (customer covers shipping costs).
  * Replacement parts are typically included in your next order or shipped via standard methods (expedited shipping available at additional cost).
• <Warranty Void Conditions>
  *Damage caused by misuse, improper operation, negligence, or unauthorized modifications.
  *Failures due to force majeure (e.g., natural disasters, power surges, chemical corrosion).
• <Recommendations>
  *Maintain critical spare parts (e.g., seals, sensors) locally to minimize downtime during repairs.

9.What’s the harmonization system code of LEISUWASH360/S90/DG/SGpro/SG PLUS/370/380/X-Smart ?
HS code: 8424899990